Canon EW-63C lens hood for EF-S 18-55mm f/3.5-5.6 IS STM objective

September 17, 2019 - Comment

Canon EW63C Lens Hood for EFS 1855mm IS STM Lens 8268B001AA Cameras Camera Accessories b Product Features Compatible with Canon EF-S 18-55mm f/4-5.6 IS STM Lens Diameter (mm):58. bayonet connection Reduces ‘flare’ caused by light shining directly on the lens’ front element. In addition since the end of the lens is extended you also get

Canon EW63C Lens Hood for EFS 1855mm IS STM Lens 8268B001AA Cameras Camera Accessories b

Product Features

  • Compatible with Canon EF-S 18-55mm f/4-5.6 IS STM Lens
  • Diameter (mm):58. bayonet connection
  • Reduces ‘flare’ caused by light shining directly on the lens’ front element.
  • In addition since the end of the lens is extended you also get the added benefit of some extra protection from accidental impact

Comments

Anonymous says:

Does not fit as advertised. For the original manufacturer of the camera lenses and camera hoods, you would think that it would be a perfect fit for the correct lens that this lens hood is supposed to be used on, but no. This lens hood is really loose and if you turn it slightly it will stay in place, but even if you turn it the slightest bit after it is on, it will then just become lose again. I don’t know if it was a fault with my particular product, but just don’t set your expectations too high for this overpriced loose…

Anonymous says:

Quality Canon product In the past I’ve bought cheap ‘no name’ brands and always lost them due to poor fit on the lens.This is clearly a genuine Canon product. It clips in securely, It’s really easy to attach and appears to be quite robust… With the previous ‘no name’ brands I have found it difficult to get them to attach and clip in securely.I am well pleased with this and would recommend this hood.

Anonymous says:

Cheaper alternative to the EW-63C The lens hood fits quite firmly, so you’ll need to make sure it’s flat against the lens otherwise it’s difficult to turn. It has a soft click when turned into place and stays firmly on. It’s easy to remove but doesn’t seem like it will be falling off at any point.To check compatibility make sure your lens has two tabs on the end. Some slightly older models of Canon 18-55 lenses come with 3 and are incompatible (for example the 18-55mm IS I/II).The plastic is of fairly…

Comments are disabled for this post.

The owner of this website is a participant in the Amazon EU Associates Programme, an affiliate advertising programme designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.co.uk.